Repairs and aftercare · LS28

Safety edge and photocell repairs in Pudsey

For homes in Pudsey and elsewhere in West Yorkshire, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Pudsey, LS28, LS13 and LS12
Area: West Yorkshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Pudsey?

A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.

How does it work in Pudsey?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Pudsey?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Pudsey and nearby

If your garage is in Pudsey (LS28, LS13 and LS12), you can get a guide price online now, and we confirm any survey or visit date in writing. Pudsey is about 5 miles from Leeds.

Looking from a neighbouring town? We also cover Bradford (4 miles) and Morley (5 miles).

Rules that apply in Pudsey

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Pudsey: questions

What should I do while I wait for a visit in Pudsey?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Pudsey visit date is confirmed in writing.

Can I get a price for Pudsey without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you repair roller doors you did not fit in Pudsey?

Yes. We repair roller garage doors of any make in Pudsey and across LS28, LS13 and LS12, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

How much is a visit in Pudsey?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Pudsey as elsewhere we cover.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.