Repairs and aftercare · LS1

Safety edge and photocell repairs in Leeds

A split safety edge or knocked photocell on your roller door in Leeds is worth fixing before the door is used again, because those devices stop it closing onto people, pets and cars. Homes in the LS1 area get the price agreed before booking.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Leeds, LS1, LS2 and LS3
Area: West Yorkshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Leeds?

The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.

How does it work in Leeds?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Leeds?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Leeds and nearby

We cover the whole of Leeds, across the LS postcode area, with the same guide prices and written quotes in every district.

We also cover Morley (4 miles), Pudsey (5 miles) and Batley (7 miles).

Rules that apply in Leeds

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Leeds: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Do you charge more for Leeds than other towns in West Yorkshire?

No. Guide prices are the same for Leeds as for anywhere else we cover in West Yorkshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I message you a photo of my garage in Leeds?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Leeds. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How much is a visit in Leeds?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Leeds as elsewhere we cover.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.